Call Us: 800-207-2259
**Price is with U.L. Group 2 dial combination lock. Photo above shows Optional AMSEC ESL10XL Digital Electronic lock**
New for 2023
The following explains the Underwriter's Laboratories' fire-resistant container testing procedures on the Class 350 degrees F, one hour and Class 350 degrees F two hour Fire Labels.
U.L. Label/Class 350 F-one hour and Class 350 F-two hours. The safe will maintain an interior temperature of less than 350 degrees F when exposed to fire for one hour at 1700 degrees F or two hours at 1850 degrees F. Safe must successfully undergo all other requirements for the Fire Endurance Test, Explosion Hazard Test, and Fire/Impact Test, as stated below.
Fire Endurance Test
After heat sensors and paper are placed inside the safe, the unit is locked and exposed to a uniformly distributed fire. The furnace is regulated to reach a maximum temperature of 1700 degrees F for one hour, or 1850 degrees F for two hours, then allowed to cool without opening the furnace. The interior temperature is recorded throughout the test and during the cooling period until a definite drop is shown and must never exceed 350 degrees F. Once cooled, the unit is opened and examined for usability. The units locking mechanism and parts fastenings are examined for security, and the interior is examined for visible evidence of undue heat transmission
Explosion Hazard Test
The safe is locked and placed into a furnace preheated to 2000 degrees F. This temperature is maintained for 30 minutes (2-hour test is 45 minutes), and if no explosion results, the unit can cool without opening the furnace doors. Once cooled, the unit is opened and examined for usability. The units locking mechanisms and parts fastenings are examined for security, and the interior is examined for visible evidence of undue heat transmission.
Fire Impact Test (Manufacturer's Option)
After the explosion hazard test, the safe is removed from the furnace and, within two minutes, is dropped 30' onto a riprap of brick on a heavy concrete base. After impact, the unit is examined for deformation, rupture of parts, damaged insulation, and any other openings in the interior. Once cooled, the unit is inverted and reheated to 1550F for 30 minutes (2 hour test: 45 minutes at 1638F). Once cooled, the unit is opened and examined for usability. The units locking mechanisms and parts fastenings are examined for security, and the interior is examined for visible evidence of undue heat transmission.
Live in county that's not near a fire department? Have important documents that must be safe from fire? Or do you want superior fire protection? We have the safe for you!
The AMSEC U.L. Listed Safe Model UL1812 Fire Rating 2 Hours Impact Rated Safe is one in a series of 6 sizes, and one of the sizes is sure to fit your needs. This safe, designed primarily for home use, conveniently fits into most small places for security and easy access.
Fire Protection is paramount in the AMSEC Model UL1812 Two Hour Fire Safe. It carries a U.L. 2 Hour Class 350 with Impact Rating. This means the safe withstands 1850 degree external temperature for two solid hours while the inside temperature does not extent beyond 350 degrees. This is a very severe test and is followed up on by U.L. often. The Impact rating means the safe is heated for 30 minutes at 1500 degrees and then dropped two stories (30') to ensure its integrity. This is a Fire Test!
The AMSEC Two Hour Fire Safe with Impact Rating carries a Lifetime Replacement Warranty if the safe is exposed to a fire. For more information on the Warranty contact our Security Specialist.
The AMSEC Model UL1812 Two Hour Fire Safe is attractive and appointed very well with a plush velour interior and a charcoal exterior colors. The door sports a brass ringed combination lock and brown powder-coated handle for easy door operation. There are also vinyl feet on this model which reduces abuse to floor or carpet.
Theft protection on the AMSEC Two Hour Fire Safe with Impact Rating is apparent by its 3 1/2" thick recessed door with a mitered door jamb. 7/8" locking bolts are activated by an "L" handle, and the U.L. Group II key changeable lock is supported by a spring-loaded relock devise activated by a severe attack. There are also heavy-duty hinges that allow the door to rotate 180 degrees when opened. Anchor bolts are included at no extra charge. When used, these make your safe even more secure.
If you need more space than the AMSEC U.L. Listed Safe Model UL1812 Fire Rating 2 Hours Impact Rated Safe, we offer 3 more larger sizes and one smaller size. Check out our website or call one of our security specialists at 1-800-207-2259 for more information on the additional sizes.
Features:
**Price is with U.L. Group 2 dial combination lock. Photo above shows Optional AMSEC ESL10XL Digital Electronic lock**
New for 2023
The following explains the Underwriter's Laboratories' fire-resistant container testing procedures on the Class 350 degrees F, one hour and Class 350 degrees F two hour Fire Labels.
U.L. Label/Class 350 F-one hour and Class 350 F-two hours. The safe will maintain an interior temperature of less than 350 degrees F when exposed to fire for one hour at 1700 degrees F or two hours at 1850 degrees F. Safe must successfully undergo all other requirements for the Fire Endurance Test, Explosion Hazard Test, and Fire/Impact Test, as stated below.
Fire Endurance Test
After heat sensors and paper are placed inside the safe, the unit is locked and exposed to a uniformly distributed fire. The furnace is regulated to reach a maximum temperature of 1700 degrees F for one hour, or 1850 degrees F for two hours, then allowed to cool without opening the furnace. The interior temperature is recorded throughout the test and during the cooling period until a definite drop is shown and must never exceed 350 degrees F. Once cooled, the unit is opened and examined for usability. The units locking mechanism and parts fastenings are examined for security, and the interior is examined for visible evidence of undue heat transmission
Explosion Hazard Test
The safe is locked and placed into a furnace preheated to 2000 degrees F. This temperature is maintained for 30 minutes (2-hour test is 45 minutes), and if no explosion results, the unit can cool without opening the furnace doors. Once cooled, the unit is opened and examined for usability. The units locking mechanisms and parts fastenings are examined for security, and the interior is examined for visible evidence of undue heat transmission.
Fire Impact Test (Manufacturer's Option)
After the explosion hazard test, the safe is removed from the furnace and, within two minutes, is dropped 30' onto a riprap of brick on a heavy concrete base. After impact, the unit is examined for deformation, rupture of parts, damaged insulation, and any other openings in the interior. Once cooled, the unit is inverted and reheated to 1550F for 30 minutes (2 hour test: 45 minutes at 1638F). Once cooled, the unit is opened and examined for usability. The units locking mechanisms and parts fastenings are examined for security, and the interior is examined for visible evidence of undue heat transmission.
Live in county that's not near a fire department? Have important documents that must be safe from fire? Or do you want superior fire protection? We have the safe for you!
The AMSEC U.L. Listed Safe Model UL1812 Fire Rating 2 Hours Impact Rated Safe is one in a series of 6 sizes, and one of the sizes is sure to fit your needs. This safe, designed primarily for home use, conveniently fits into most small places for security and easy access.
Fire Protection is paramount in the AMSEC Model UL1812 Two Hour Fire Safe. It carries a U.L. 2 Hour Class 350 with Impact Rating. This means the safe withstands 1850 degree external temperature for two solid hours while the inside temperature does not extent beyond 350 degrees. This is a very severe test and is followed up on by U.L. often. The Impact rating means the safe is heated for 30 minutes at 1500 degrees and then dropped two stories (30') to ensure its integrity. This is a Fire Test!
The AMSEC Two Hour Fire Safe with Impact Rating carries a Lifetime Replacement Warranty if the safe is exposed to a fire. For more information on the Warranty contact our Security Specialist.
The AMSEC Model UL1812 Two Hour Fire Safe is attractive and appointed very well with a plush velour interior and a charcoal exterior colors. The door sports a brass ringed combination lock and brown powder-coated handle for easy door operation. There are also vinyl feet on this model which reduces abuse to floor or carpet.
Theft protection on the AMSEC Two Hour Fire Safe with Impact Rating is apparent by its 3 1/2" thick recessed door with a mitered door jamb. 7/8" locking bolts are activated by an "L" handle, and the U.L. Group II key changeable lock is supported by a spring-loaded relock devise activated by a severe attack. There are also heavy-duty hinges that allow the door to rotate 180 degrees when opened. Anchor bolts are included at no extra charge. When used, these make your safe even more secure.
If you need more space than the AMSEC U.L. Listed Safe Model UL1812 Fire Rating 2 Hours Impact Rated Safe, we offer 3 more larger sizes and one smaller size. Check out our website or call one of our security specialists at 1-800-207-2259 for more information on the additional sizes.
Features:
