Call Us: 800-207-2259
The Hollon FD-4020EILK is a 40-inch B-rated depository safe built for businesses that need two layers of cash control under one door. Shift employees drop daily receipts into the main compartment through the anti-fish-baffled front slot, while the key-locked inner compartment inside the main body gives a second person separate access to a protected tray for a float, petty cash, or any portion of the day's take you want to isolate behind a second lock. For restaurants, convenience stores, retail counters, and any operation that runs multiple shifts between pickups, the two-compartment design keeps responsibilities split without adding a second safe to the floor.
The main body opens with a UL Listed Type 1 S&G Electronic Lock. Managers set and change their own PIN in seconds, which matters when staff turns over or when a shift changeover needs a quick code rotation. The inner compartment uses a separate key lock, so the person emptying the inner tray and the person opening the main body do not need to be the same employee. That split-access pattern is common in multi-shift retail and food service, and in locations where an armored car service empties the deposit body on a route while on-site managers retain control of the inner tray between pickups.
Construction is standard for Hollon's B-rated depository line and heavy for a 40-inch body. The door is a half-inch solid steel plate secured by seven 1.25-inch solid steel active locking bolts, with a heavy-duty dead bar on the hinge side that prevents door removal during a forced-entry attempt. A drill- and ballistic-resistant hard plate protects both the electronic lock and the internal spring-loaded relocker, so a drill attack on the lock body triggers the secondary bolt lockdown rather than opening the door. Four pre-drilled anchor holes let you bolt the 250-pound body to the floor so it cannot be lifted or wheeled off site, which is the single most important thing you can do to make a B-rated depository stay in place during an opportunistic smash-and-grab.
The interior gives you 3.59 cubic feet in the main compartment with one removable shelf, and the inner lock box adds a separate 1.68 cubic feet behind the key lock. Buyers who prefer a mechanical dial on the main compartment instead of the keypad should look at the Hollon FD-4020CILK, which is the same body with a UL Listed Group 2 dial in place of the electronic lock. If a single-compartment layout fits your workflow better, the Hollon FD-4020E gives you the same 40-inch body and electronic keypad in a full-height single interior.
Call us at 800-207-2259 if you want help confirming whether the 40-inch two-compartment layout or a smaller depository fits your drop volume and shift pattern.
Features:
Specifications:
The Hollon FD-4020EILK is a 40-inch B-rated depository safe built for businesses that need two layers of cash control under one door. Shift employees drop daily receipts into the main compartment through the anti-fish-baffled front slot, while the key-locked inner compartment inside the main body gives a second person separate access to a protected tray for a float, petty cash, or any portion of the day's take you want to isolate behind a second lock. For restaurants, convenience stores, retail counters, and any operation that runs multiple shifts between pickups, the two-compartment design keeps responsibilities split without adding a second safe to the floor.
The main body opens with a UL Listed Type 1 S&G Electronic Lock. Managers set and change their own PIN in seconds, which matters when staff turns over or when a shift changeover needs a quick code rotation. The inner compartment uses a separate key lock, so the person emptying the inner tray and the person opening the main body do not need to be the same employee. That split-access pattern is common in multi-shift retail and food service, and in locations where an armored car service empties the deposit body on a route while on-site managers retain control of the inner tray between pickups.
Construction is standard for Hollon's B-rated depository line and heavy for a 40-inch body. The door is a half-inch solid steel plate secured by seven 1.25-inch solid steel active locking bolts, with a heavy-duty dead bar on the hinge side that prevents door removal during a forced-entry attempt. A drill- and ballistic-resistant hard plate protects both the electronic lock and the internal spring-loaded relocker, so a drill attack on the lock body triggers the secondary bolt lockdown rather than opening the door. Four pre-drilled anchor holes let you bolt the 250-pound body to the floor so it cannot be lifted or wheeled off site, which is the single most important thing you can do to make a B-rated depository stay in place during an opportunistic smash-and-grab.
The interior gives you 3.59 cubic feet in the main compartment with one removable shelf, and the inner lock box adds a separate 1.68 cubic feet behind the key lock. Buyers who prefer a mechanical dial on the main compartment instead of the keypad should look at the Hollon FD-4020CILK, which is the same body with a UL Listed Group 2 dial in place of the electronic lock. If a single-compartment layout fits your workflow better, the Hollon FD-4020E gives you the same 40-inch body and electronic keypad in a full-height single interior.
Call us at 800-207-2259 if you want help confirming whether the 40-inch two-compartment layout or a smaller depository fits your drop volume and shift pattern.
Features:
Specifications:
