Call Us: 800-207-2259
Ships Same Business Day
The Liberty Pro Flex Jewelry Drawer turns the left column of a Pro Flex interior into a dedicated jewelry and small-valuables organizer, giving rings, earrings, watches, and loose pieces their own compartments instead of leaving them loose in a drawer or box on a shelf. Three push-to-open drawers stack inside a single 14.25-inch-wide housing: the top drawer holds watches on eight included pillows that keep bands supported and faces upright, the middle drawer is laid out for rings and earrings behind removable trays with ring slots on one side and earring post holes on the other, and the bottom drawer gives you four divided compartments for bracelets, pendants, loose chains, cufflinks, or anything that doesn't fit the ring or watch layouts above. The push-to-open mechanism opens each drawer with a light press on the front panel, which keeps the exterior clean without visible handles.
The jewelry drawer is designed exclusively for Liberty's Pro Flex interior system, so it fits only Pro Flex-equipped safes from the Colonial, Franklin, Lincoln, and Presidential series. It installs in the Pro Flex A zone, the left column of the interior, and drops into place against the existing Pro Flex mounting points without tools or separately sourced hardware. If your Liberty safe does not have a Pro Flex interior, this accessory will not fit; the Pro Flex system is distinct from Liberty's older interior configurations, and the mounting pattern is specific to the Pro Flex rails.
If your safe does not have a Pro Flex interior but you have at least 14.25 inches of width, 12.38 inches of height, and 12 inches of depth of open shelf or floor space, the Pro Flex rails can be removed to use the jewelry drawer as a freestanding unit. In that configuration, it sits on a shelf or safe floor rather than mounting into Pro Flex rails, so it is not anchored to the interior, but the drawers, trays, watch pillows, and push-to-open mechanism all function the same regardless of how it is installed. If you are planning to use it this way, measure the open interior space of your safe before ordering to confirm the 14.25-inch width clears your door bolts, interior rails, and shelf lips.
Overall dimensions are 14.25 inches wide by 12.38 inches tall by 12 inches deep, so it occupies the single-column footprint that the Pro Flex A zone is designed around, leaving the rest of the interior open for long guns, documents, or additional Pro Flex accessories like the Document Drawer or Watch Winder on the opposite side. The watch pillows are removable, the ring and earring trays lift out for cleaning or layout changes, and the drawer bodies move on soft-close rails that eliminate the slam a standard drawer makes when it's pushed shut quickly.
If you have questions about Pro Flex compatibility, whether your Liberty safe can accept the jewelry drawer, or how to position it alongside other Pro Flex accessories inside, please call us at 800-207-2259.
Features:
Compatibility:
Specifications:
The Liberty Pro Flex Jewelry Drawer turns the left column of a Pro Flex interior into a dedicated jewelry and small-valuables organizer, giving rings, earrings, watches, and loose pieces their own compartments instead of leaving them loose in a drawer or box on a shelf. Three push-to-open drawers stack inside a single 14.25-inch-wide housing: the top drawer holds watches on eight included pillows that keep bands supported and faces upright, the middle drawer is laid out for rings and earrings behind removable trays with ring slots on one side and earring post holes on the other, and the bottom drawer gives you four divided compartments for bracelets, pendants, loose chains, cufflinks, or anything that doesn't fit the ring or watch layouts above. The push-to-open mechanism opens each drawer with a light press on the front panel, which keeps the exterior clean without visible handles.
The jewelry drawer is designed exclusively for Liberty's Pro Flex interior system, so it fits only Pro Flex-equipped safes from the Colonial, Franklin, Lincoln, and Presidential series. It installs in the Pro Flex A zone, the left column of the interior, and drops into place against the existing Pro Flex mounting points without tools or separately sourced hardware. If your Liberty safe does not have a Pro Flex interior, this accessory will not fit; the Pro Flex system is distinct from Liberty's older interior configurations, and the mounting pattern is specific to the Pro Flex rails.
If your safe does not have a Pro Flex interior but you have at least 14.25 inches of width, 12.38 inches of height, and 12 inches of depth of open shelf or floor space, the Pro Flex rails can be removed to use the jewelry drawer as a freestanding unit. In that configuration, it sits on a shelf or safe floor rather than mounting into Pro Flex rails, so it is not anchored to the interior, but the drawers, trays, watch pillows, and push-to-open mechanism all function the same regardless of how it is installed. If you are planning to use it this way, measure the open interior space of your safe before ordering to confirm the 14.25-inch width clears your door bolts, interior rails, and shelf lips.
Overall dimensions are 14.25 inches wide by 12.38 inches tall by 12 inches deep, so it occupies the single-column footprint that the Pro Flex A zone is designed around, leaving the rest of the interior open for long guns, documents, or additional Pro Flex accessories like the Document Drawer or Watch Winder on the opposite side. The watch pillows are removable, the ring and earring trays lift out for cleaning or layout changes, and the drawer bodies move on soft-close rails that eliminate the slam a standard drawer makes when it's pushed shut quickly.
If you have questions about Pro Flex compatibility, whether your Liberty safe can accept the jewelry drawer, or how to position it alongside other Pro Flex accessories inside, please call us at 800-207-2259.
Features:
Compatibility:
Specifications:
