Call Us: 800-207-2259
Ships Same Business Day
The Liberty Pro Flex Watch Winder is a powered, dual-head automatic watch winder sized to fit in the front portion of a Pro Flex interior's A zone, keeping two automatic watches wound and ready to wear while they sit in the safe between uses. Automatic watches stop running within a day or two when they come off the wrist, and the time-and-date complications on a perpetual calendar or dual-time watch can take fifteen minutes of manual resetting every time the watch stops. The Pro Flex Watch Winder solves that by rotating each watch on a programmed cycle so the mainspring stays tensioned, the date advances on its own, and the watch is ready to wear whenever you take it out of the safe without any manual winding or resetting.
Two watch cradles sit side by side inside a single 14.25-inch-wide housing, each cradle holding one watch on a padded leather cuff, with a single shared controller mounted between them to set the direction and cycle for both winders at once. The housing is 12 inches tall by 6.13 inches deep, which occupies the front portion of the A zone rather than the full column depth, leaving the back of the A zone open for a smaller accessory or giving you clearance to run a power cord to the safe's interior outlet.
The Pro Flex Watch Winder is designed exclusively for Liberty's Pro Flex interior system, so it fits Pro Flex-equipped safes from the Colonial, Franklin, Lincoln, and Presidential series. It installs in the Pro Flex A zone, the left column of the interior, and drops into place against the existing Pro Flex mounting points without tools or separately sourced hardware. If your Liberty safe does not have a Pro Flex interior, this accessory will not mount as designed; the Pro Flex system differs from Liberty's older interior configurations, and the mounting pattern is specific to the Pro Flex rails.
If your safe does not have a Pro Flex interior but you have at least 14.25 inches of width, 12 inches of height, and 6.13 inches of depth of open shelf or floor space plus access to an electrical outlet or safe-interior power strip, the Pro Flex rails can be removed to use the Watch Winder as a freestanding unit. In that configuration, it sits on a shelf rather than mounting into Pro Flex rails, so it is not anchored to the interior, but the winders and controller function the same regardless of how it is installed. If you are planning to use it this way, measure the open interior space of your safe before ordering to confirm the footprint clears your door bolts, interior rails, and shelf lips, and confirm you have a power source routed to that space.
Overall dimensions are 14.25 inches wide by 12 inches tall by 6.13 inches deep. The Pro Flex Watch Winder shares the same A-zone width as the Liberty Pro Flex Jewelry Drawer and Liberty Pro Flex Document Drawer, so you can combine accessories inside a single safe if you have multiple A-zone slots across different safes, or pair the Watch Winder with the Jewelry Drawer or Document Drawer in a Pro Flex interior that supports stacking.
If you have questions about Pro Flex compatibility, whether your Liberty safe can accept the Watch Winder, power requirements, or how to position it alongside other Pro Flex accessories, please call us at 800-207-2259.
Features:
Compatibility:
Specifications:
The Liberty Pro Flex Watch Winder is a powered, dual-head automatic watch winder sized to fit in the front portion of a Pro Flex interior's A zone, keeping two automatic watches wound and ready to wear while they sit in the safe between uses. Automatic watches stop running within a day or two when they come off the wrist, and the time-and-date complications on a perpetual calendar or dual-time watch can take fifteen minutes of manual resetting every time the watch stops. The Pro Flex Watch Winder solves that by rotating each watch on a programmed cycle so the mainspring stays tensioned, the date advances on its own, and the watch is ready to wear whenever you take it out of the safe without any manual winding or resetting.
Two watch cradles sit side by side inside a single 14.25-inch-wide housing, each cradle holding one watch on a padded leather cuff, with a single shared controller mounted between them to set the direction and cycle for both winders at once. The housing is 12 inches tall by 6.13 inches deep, which occupies the front portion of the A zone rather than the full column depth, leaving the back of the A zone open for a smaller accessory or giving you clearance to run a power cord to the safe's interior outlet.
The Pro Flex Watch Winder is designed exclusively for Liberty's Pro Flex interior system, so it fits Pro Flex-equipped safes from the Colonial, Franklin, Lincoln, and Presidential series. It installs in the Pro Flex A zone, the left column of the interior, and drops into place against the existing Pro Flex mounting points without tools or separately sourced hardware. If your Liberty safe does not have a Pro Flex interior, this accessory will not mount as designed; the Pro Flex system differs from Liberty's older interior configurations, and the mounting pattern is specific to the Pro Flex rails.
If your safe does not have a Pro Flex interior but you have at least 14.25 inches of width, 12 inches of height, and 6.13 inches of depth of open shelf or floor space plus access to an electrical outlet or safe-interior power strip, the Pro Flex rails can be removed to use the Watch Winder as a freestanding unit. In that configuration, it sits on a shelf rather than mounting into Pro Flex rails, so it is not anchored to the interior, but the winders and controller function the same regardless of how it is installed. If you are planning to use it this way, measure the open interior space of your safe before ordering to confirm the footprint clears your door bolts, interior rails, and shelf lips, and confirm you have a power source routed to that space.
Overall dimensions are 14.25 inches wide by 12 inches tall by 6.13 inches deep. The Pro Flex Watch Winder shares the same A-zone width as the Liberty Pro Flex Jewelry Drawer and Liberty Pro Flex Document Drawer, so you can combine accessories inside a single safe if you have multiple A-zone slots across different safes, or pair the Watch Winder with the Jewelry Drawer or Document Drawer in a Pro Flex interior that supports stacking.
If you have questions about Pro Flex compatibility, whether your Liberty safe can accept the Watch Winder, power requirements, or how to position it alongside other Pro Flex accessories, please call us at 800-207-2259.
Features:
Compatibility:
Specifications:
